Pull glass on screw connection
side out of mirror housing.
Remove the light source 2
from the light housing by
pressing it in and turning it
counterclockwise.
Replace defective light source.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
To prevent dirt from being de-
posited on the glass surface,
always use a clean, dry cloth to
hold the light source.
Install the light source 2 in the
light housing by pressing it in
and turning it clockwise.
Insert inside end of lens into
light housing and close it.
9
181
z