BMW S 1000RR Rider's Manual page 173

ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque.
Damage or loosening of screwed
connections.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ATTENTION
Front wheel installation op-
posite the running direction.
Accident hazard
Observe running direction ar-
rows on tire or rim.
Roll front wheel into front
suspension.
Lift front wheel and install
quick-release axle 1 with
torque.
Quick-release axle in
threaded bush
37 lb/ft (50 Nm)
Tighten clamping screws 2 to
specified torque.
Clamping screw in axle
adapter
Tightening sequence: Tighten
the screws 6 times, alternating
between one and the other
each time
14 lb/ft (19 Nm)
Remove front wheel stand and
auxiliary stand.
Slide the brake calipers onto
the brake rotors.
9
171
z