BMW S 1000RR Rider's Manual page 86

the ignition. To check the wheel
6
speed sensors, the motorcycle
must be driven a few yards.
84
Phase 1
Check on system components
monitored by diagnostic sys-
tem while motorcycle is parked.
ABS indicator light flashes.
z
Phase 2
Check wheel sensors while
starting off.
ABS indicator light flashes.
ABS self-diagnosis
completed
The ABS indicator and warning
light goes out.
If an ABS error is displayed after
the ABS self-diagnosis is com-
pleted:
It remains possible to continue
riding. It must be noted that
the ABS and integral function
is not available at all or is re-
stricted.
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad retailer.
ASC self-diagnosis
The self-diagnosis routine
is determining whether
BMW Motorrad ASC is ready for
operation. The self-diagnosis
routine runs automatically when
you switch on the ignition.
Phase 1
Check on system components
monitored by diagnostic sys-
tem while motorcycle is parked.
ASC indicator and warning
light flashes slowly.
Phase 2
Checking the diagnosable sys-
tem components while driving.
In order that the ASC self-di-
agnosis can be completed, the
motorcycle must be traveling
at a speed of at least 3 mph
(5 km/h).
ASC indicator and warning
light flashes slowly.
ASC self-diagnosis
completed
The ASC symbol is no longer
displayed.
If an ASC error is displayed after
the ASC self-diagnosis is com-
pleted:
It remains possible to continue
riding. It must be noted that
the ASC function is not avail-
able.
Have the malfunction corrected
as soon as possible at an
authorized service facility,