BMW S 1000RR Rider's Manual page 118

7
116
Press and hold SET 2 until dis-
played parameter begins to
flash.
Briefly press TRIP 1 or SET 2
repeatedly until desired value is
displayed.
z
If desired value is displayed:
Press and hold SET 2 until dis-
played value no longer flashes.
The value has been saved.
Exiting settings
Press and hold TRIP 1
until multifunction display is
switched over to standard
display.
A flashing value will still be
saved.
As an alternative: repeatedly
press TRIP 1 or SET 2 until
SETUP ... EXIT
is shown in
the respective submenu.
Press and hold SET 2 to exit
submenu.
SETUP ... ENTER
cated.
Repeatedly press TRIP 1 or
SET 2 until
EXIT
Press and hold SET 2 to exit
SETUP MENU
SETUP MENU ENTER
indicated.
is indi-
SETUP MENU
is displayed.
.
is