Riding Mode - BMW S 1000RR Rider's Manual

Heating up on an auxiliary
8
stand at idle speed or with gear
engaged.
146
If the coding plug is not used for
SLICK
the and
modes, the DTC is reactivated
by switching the ignition off and
on and then riding at a minimum
speed.
Minimum speed for DTC
activation
min 6 mph (min 10 km/h)
If the front wheel loses con-
tact with the ground under ex-
z
treme acceleration, the ASC or
DTC function reduces the en-
gine torque in the
SPORT
riding modes until the
front wheel makes contact with
the ground again.
Wheely support is deactivated in
SLICK
the

riding mode.

BMW Motorrad recommends
that you respond to this condi-
tion by twisting back the throttle
grip somewhat to return to stable
dynamic operating conditions as
USER
riding
quickly as possible.
On a slippery surface, the throttle
grip should never be suddenly
twisted back completely unless
the clutch is disengaged at the
same time. The engine braking
torque can cause the rear wheel
to slip, resulting in an unstable
driving state. This case cannot
be controlled by BMW Motorrad
DTC.

Riding mode

RAIN
and
Selection
There are 5 riding modes to
choose from for adjusting the
motorcycle to the weather, road
conditions and driving style:
RAIN
SPORT (default mode)
RACE
SLICK (with coding plug in-
stalled only)
USER (only with coding plug
installed)
with Pro riding modes
WARNING
Increased engine perfor-
mance in all riding modes
by inserting the coding plug
on motorcycles with power
reduction.
Accident hazard
Familiarize yourself with the
more performance-oriented
response.
Do not use the encoding plug
on public roads.
OE