Clean thread 1.
Slide protective cap 2 onto
gear-shift rod 4.
Remove screw 3.
Remove washer between ball
joint and gearshift lever.
Reposition gear-shift rod 4 to
thread 1.
Insert screw through ball joint
and washer and install in thread
for shift pattern reversal.
Shift rod on gearshift
lever
Joint compound: Micro-
encapsulated or medium-
strength screw lock
6 lb/ft (8 Nm)
Fit the protective cap.
The shift pattern reversal has
been set up for the racing
mode.
with Pro shift assistant
Clean thread 1.
Slide protective cap 2 onto
gear-shift rod 4.
Remove screw 3.
Remove washer between ball
joint and gearshift lever.
Reposition gear-shift rod 4 to
thread 1.
OE
7
137
z