BMW S 1000RR Rider's Manual page 174

9
172
Lay on brake caliper 1 on left
and position cable guide 2.
Install screws 3 with specified
torque.
z
Radial brake calipers on
the axle adapter
28 lb/ft (38 Nm)
Fasten cable for wheel speed
sensor in bracket (arrow).
Insert wheel speed sensor in
bore and fasten with screw 1.
Lay on brake caliper 1 on right
and install screws 2 with speci-
fied torque.
Radial brake calipers on
the axle adapter
28 lb/ft (38 Nm)
Remove adhesive tape from
wheel rim.
Operate the brake lever firmly
several times, until the pressure
point is felt.
Removing rear wheel
Raise motorcycle, preferably
with a BMW Motorrad rear-
wheel stand.
Mounting rear-wheel stands
( 158).
Support the rear wheel, e.g.,
with a wooden block, so that
it cannot fall down after the
quick-release axle is removed.