BMW S 1000RR Rider's Manual page 189

Then remove positive battery
cable 2.
Connect battery to vehicle
First install positive battery ca-
ble 2.
Then install negative battery
cable 1.
with anti-theft alarm system
(DWA) OE
First install positive battery ca-
ble 2.
Then install negative battery
cable 1.
Installing driver's seat (
Charging battery
Disconnect battery from motor-
cycle ( 186).
Charge battery using a suitable
charger.
Comply with operating instruc-
tions of charger.
Once battery is fully charged,
disconnect charger's terminal
clips from battery terminals.
NOTICE
In the case of longer periods
when the motorcycle is not be-
ing used, the battery must be
recharged regularly. See the
instructions for caring for your
battery. Always fully recharge
the battery before returning it to
use.
Connect battery to vehicle
( 187).
63).
Removing battery
Removing rider`s seat (
Disconnect battery from motor-
cycle ( 186).
Lift battery upwards; if it is dif-
ficult to move, moving it back
and forth will help.
9
187
z
63).