BMW S 1000RR Rider's Manual page 179

Remove the cover 2 to replace
the light source for the high-
beam headlight.
Disconnect plug 3.
Release wire spring 4 from
catch on left and right and fold
up.
Remove light source 5 from
the socket.
Replace defective light source.
NOTICE
Light sources featuring spec-
ification ratings for higher lev-
els of illumination are commer-
cially available as special acces-
sories. These light sources have
a shorter service life than con-
ventional light sources and also
generate more heat. Under some
circumstances the high levels of
heat radiation can damage the
headlight assembly.
Bulbs for low-beam
headlight
H7 / 12 V / 55 W
Bulb for high-beam
headlight
H7 / 12 V / 55 W
To protect the glass against
soiling, only grasp the light
source by the base.
9
177
z