BMW S 1000RR Rider's Manual page 115

Selecting submenu
Switch on ignition (
Briefly press SET 2 repeatedly
SETUP MENU ENTER
until
is displayed.
NOTICE
If the display has been scrolled
too far, briefly press SET 2 re-
peatedly until the menu returns
to the start and finally to the de-
sired display.
Press and hold SET 2.
Briefly press TRIP 1 or SET 2
repeatedly until desired sub-
menu is displayed.
Press and hold SET 2 to open
desired submenu.
When SET 2 is pressed, the
possible parameters are dis-
played in the following order;
each time TRIP 1 is pressed,
they are displayed in the reverse
order.
40).
SETUP DDC-SYS
with Dynamic Damping Control
(DDC) OE
SETUP DDC-SYS
Rebound stage damping, rear
REAR REB
Rear compression-stage damp-
REAR COM
ing
Without spring travel sensor
for front forks: Front damping
FRONT DMP
With spring travel sensor for
front forks: Front rebound-
FRONT REB
stage damping
With spring travel sensor for
front forks: Front compression
FRONT COM
damping
CALIB
Zero calibration
SET-DR ON
Activate
ing Ride) or deactivate
DR OFF
adjustable damping
while riding.
Reset DDC settings of cur-
RESET AC-
rent riding mode
TUAL
.
Reset DDC settings of all riding
RESET ALL
modes
SETUP EQUIPMENT
SETUP EQUIPMENT
with anti-theft alarm system
OE
(DWA)
Automatically activate the alarm
function of the anti-theft alarm
system after switching off
DWA AUTO ON
the ignition
7
113
(Dur-
SET-
z
.