Shift Pattern Reversal - BMW S 1000RR Rider's Manual

Installing front turn signal
7
136
Remove the screw 1 on the
inside of the right side panel.
z
Remove screws 2.
Detach fairing side panel from
grommet 3 and detent pin 4.
Guide cable through fairing
side panel.
Position turn signal 2 and in-
stall screw 1.
Clip in cable 3 on bracket 4.
Installing fairing side panel
( 184).

Shift pattern reversal

Shift pattern for racing
mode
For the racing mode, the shift
pattern can be reversed by mod-
ifying the gear-shift rod. Shift
pattern reversal means that the
gearshift lever must be actuated
upward for 1st gear and down-
ward for all other gears. This
is the opposite of operation on
public roads.
Reversing shift pattern
ATTENTION
Riding with shift pattern re-
versal.
Expiry of operating license for
public roads.
Do not use shift pattern rever-
sal on public roads.