O-E41/O-E42/O-E43/E48/O-E49, Etc - Pentax 67 II Service Manual

8.2 0-FAI (Curtain pipe), O-E42 (1st curtain pipe), O-E43 (2nd curtain pipe),
E48
(Isl
curtain shaft A), O-E49 (1st curtain shan B), etc.
1) Remove any oil from ribbon atlachment section of O-E43.
2) Peel off hacking paper E54 on O-E59 aud attach ribbons with low place on drnrn ramp section of O-E43 as standard.
3) Rotate O-E43, wiud off ribbou, and se.al.
4) Provisionally attach E48 and O-E49 to 0-£15 and remove any oil from E48 atlachment section and
O-E49 attachment section.
5) Peel off backing paper E.54 on O-E63 side and attach ribbons with low place on drum ramp section of O-E49
as standard.
6) Rotate O-E35, wind off ribbon, and seal.
7) Remove any protrnding adhesive, etc., and leave undisturbed for more than 12 hours.
8) Remove any oil from O-E41 ribbon attachment section.
9) Remove peeling paper E.53 on O-E59 side and attach shutter with a low place on drnm ramp section of O-E41
as standard.
10) Rotate O-E41, wind shutter and seal.
11) Remove peeling paper E53 on O-E63 side and attach shutter in principle with low place on ramp section of
O-E42 as standard.
12) Rotate O-E42, wind off ribbon, and seal.
13) Remove any protrnding adhesive, etc., and leave undisturbed for more than 12 hours.
27340 57170