Disassembly And Assembly Procedure; Grip Rubber, Body Covering; Bottom Cover; Rear Cover - Pentax 67 II Service Manual

Disassembly and assembly procedure
NB: In order to prevent static destruction of the inner circuit, use should be made of conductive mats
and wrist straps.
J. Body I
(Disassembly procedure)
l'rcparatiou~:
Sc.t the camera in the released position.
Remove the battery holder, the battery, the body mount cap and the finder cap.
1.1 Grip rubber, body covering
I) Gently peel off A102, then remove A120 beneath it.
A512
1.2 Bottom cover (Al21)
1) 7 screws
1.3 Rear cover (A321)
1) 4 screws
2)Ml0 x2
1.4 Focus screen frame (Ml)
1) Remove Ml from the
back.
2) M6: 2 screws, W2 x2
4170
A112
27340
A132
1
~1 0 2
~
Cl'lL-G1 .7 x 3.Sx 2
.
~
M 6
::;... en