Main Gear - Pentax 67 II Service Manual

23 Winding shaft plate (0-C34)
Equipment to be prepared : Driver bit 23400K-C73 -A
1) Align C44 and C94 (spring) and attach.
2) C43 (C43 will come off at this state)
3) Attach O-C3 by passing through the body from below.
(Apply G21 to the gears.)
4) O-C34, C15
--0>
(C15 should be thoroughly press-fitted.)
5) C57 (Screw Jock, tools to be used), E93
6) C2, CNS 1.7 x4.5
Check: Check that the gears rotate smoothly.
7) C85, C84, PT (4 x2.5), C60
CNL-Bl.4 x2.5
9) C40, C35, C37, C83, CNL-Dl.4 x2.5
Apply G151 to tip of C35.
10) C96, C33, CSSl.7 x2.5 x3
NB: Make sure that C96 does not intrnde
while turning C43.
2.4 Main gear (assy.) (0-Cl)
1) Release. the shutte.r curtain.
2) Re.move. O-E80 (curtain charge gear) and
O-D43 (mirror charge gear).
NB: Take care not to Jose. the ste.e.J balls.
12/70
27340
O-C3