Disassembly And Assembly - Pentax 67 II Service Manual

l.
Disassembly
and
Assembly
Disassembly and assembly should be carried out with reference to the following Figs. 1to 12.
Note: Eyepiece shutter should be handled in an OPEN
STATIJS.
Y75x2
Fig.2
Fig.1
Y76
/~
/~
°'0-.
~
________.,
' "
CNL-Dl.7x55
~
Y39
Note : When removing Diaopter adjustment
dial
retainer
screw (CNL-D1.7x55), tum the Diopter adjustment ring
screw towards ( - ) side and loosen CNL-D1.7x 5.5
screw.
Note: Y39 affixing jx>sition
After turning the Diopter adjustment ring fully in the
' clockwise direction, tum it counterclockwise 180 degrees.
. \Affix Y39 so that it jX)Sitions (+)side comes top.
~
TY-CNL-Dl.7x45 x2
Note : When assembling, push Photo sensor part 0102 towards
( t )
and (
t )
and tighten two screws.
CNL-Dl.7x4.0 x2
Fig.3
219 71081 : Service Manual