M3; B5/K115; B2 And Related Parts - Pentax 67 II Service Manual

6.13 M3 (Focus screen adjusting plate)
1) Installing M3
Insert section
CD
below MS
and install section
®
vertically.
2) Fasten CNS
1.7 x4.0
x4.
3) Fasten the set screws (ST-F 2.0 x2.0 x4)
until they contact. t.he die casting
surface of the Mirror box.
6.14 BS (Light seal spring),
· KUS (Resistor spacer)
1) Move K115 to the lower side of
the Mirror box and attach above 0-KlOl.
2) Attach BS to K105 to avoid
bumps or gaps between
K105
and mirror box as shown in
the drawing.
6.lS B2 (Bayonet seat) and related parts
1) Align with center of hole of mirror box
and set W8 (t=0.2) in four places.
(Apply G31 to B3. Refer to next page)
2) Dislodge the slider frame clockwise and fit B2
into the Mirror box.
3) Screw tight with CNS 2.3 x5 .0 x4.
4) Check operation of O-K.102.
5) Check operation of B33 (Mount lock lever)
6) Install B55, B56, B57 and B58
(Bayonet seat covering
A,
B, C, D)
42170
M3
27:340