O-Kl02, K105 X2; M5/M11/M12 X2; O-T301, M9 X2, A33 - Pentax 67 II Service Manual

6.10 O-Kl02 (Diaphragm couple ring), K105 (Slider cover) x2
1) Wipe KlOl.
2)Apply L-115 to the O-K102 contact side
of the Mirror hox .
.3)
Fit the slider spring (KHl9) to the slider spring
hook
(KI
04) and
install KI
02 .
4) Fix K105 x2 with CNL-D 1.7 x2.5 x4.
5) Check : O-Kl02 should be rotated smoothly.
Note: Break off the tip of the brnsh of 0-Kl 02
from the V notch when using new parts.
6.11 MS (Focus screen retainer) x2,
Mll (Viewfinder positioning pin) x2,
M12 (Focus screen retainer spring) x2
(Tools: 95901-K280 (Driver bit for 27340-Mll)
1
)Attach
to the Mirror box in the
order MS,
. Ml2, Mll and fix with Mll by the tool.
2)Cbeck : Lift up MS, and MS should be return
to the original position by the spring tension.
6.12 O-T301 (Viewfinder contact board),
M9 (Penta regulation rubber A) x2,
A33 (Retainer screw C)
1)
Pass the flex part of O-T301 through
the bole on the Mirror box, and attach
M9 x2 onto the Mirror box, and then
fix with A33 x2.
Bottom view M9
Flat part faces front
27:340 41170