Pentax 67 II Service Manual page 38

20. Ped off D130 (Light seal tape) x2, remove D147 (Ann pedestal retainer screw) x3, CNL-DJ.7 x2.5 (winding side),
DJ 4 7 x2 (Shutter dial side), and remove 0-D 126 (Ann pedestal) x2 and 0-D 125 (Minor s!Jcct) taking care uot
lo
mislay the washers.
0 - 012~
'
~ ~ ~
<!~~ 1~ 2 6
""---;::> 01 47
, A
~?
" c'NL- 01
.7x2 5
~--
W3 L=0.1(- adj.)
0- 0126
21. Remove D148 (Damper plate adjusting screw) x2 while pressing down D149 (Damper plate adjusting nut) x2,
remove CNL-Dl .7 x2.0 x2, and take D132 (Damper plate L), and D133 (Damper plate R).
CNL-D 1.7x2.0
22. Parts not specifically to be removed at the training.:
B8 (Mirror housing frame),
D67 (Mirror stopper support spring),
D68 (Support spring retainer collar),
0127 (Spring hook screw),
KlOl (Resistor),
Kl
11 (Slider roller),
K112 (Slider roller shaft),
0 -J 201 (Light sensor).
37170