Rear Cover Switch Pedestal; Lead Wire - Pentax 67 II Service Manual

2.13 Rear cover switch pedestal (A80)
1) Open the Back cover.
2)A85
3) A80, switch contact.
4) Move A80 forward to the left and attach.
CNL-D1.7 x2.5, CNM 1.7 x5 .5
5) Check: Back cover switch, pressure plate switch.
Each switch should go on and off securely
hy opening and closing the Back cover and
switching the pressure plate (120-E--?220).
2.14 Lead wire (TIOO)
1) Solder 10 lead wires.
- Lower side of body TIOO
O-C102(4)
O-T311(2)
C90(1 ), D72(1)
Black, yellow (free).
Green
2) Treatment of lead wires.
2.15 Grip (0-ASOl) and related parts
1) Set the body to the winding completion state.
2) Move O-C20 to the outer side (left)
3) Attach O-A501 while paying attention to
the interlocking of O-C20 (Fig. 1) and
insertion of lead wires.
4) Move the. upper part of O-A501 to the mirror
box side and fix the screws in the order of
A515 x2 and CNMl.7 x4.0 x2.
5) Check: Check that the gap betwee.n the
contacts of A551 and A552 (multiple switch)
is 0.5
+/-
0.3 mm. (Fig. 1)
A510
6) Solder four lead wires
-7
0
16/70 27340
CNL - [) 1. 7 X
2 . ~'
Black
(105mm)
e