12 SERVICE WORK ON THE CHASSIS
12.20
12.21
72
Removing the seat
W00301-10
W00311-10
Mounting the seat
W00314-10
W00301-10
–
1
Remove screw
.
–
Raise seat, pull it toward the fuel tank and take it off.
–
Mount the front of the seat on the collar bushings of the fuel
tank, lower the seat at the rear, and push the seat to the rear.
The holding lugs engage in the recesses at the back.
–
Make sure the seat is latched in place correctly.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
1
.
M6
10 Nm (7.4 lbf ft)