Table of Contents
Advertisement
17 TUNING THE ENGINE
17.1
17.2
126
Checking the play in the throttle cable
400192-11
Adjusting the play in the throttle cable
Info
If the correct routing of the throttle cables has already been secured, the fuel tank does not need to be
removed.
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Turn the
throttle grip back and forth slightly and determine the play in
A
throttle cable
.
Play in throttle cable
»
If the throttle cable play does not meet the specified value:
–
Adjust the play in the throttle cable.
–
Push the cold start button in all the way.
When the throttle grip is turned forward, the cold start but-
ton returns to its original position.
»
If the cold start button does not return to its original posi-
tion:
–
Adjust the play in the throttle cable.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and let it run at idle speed. Move the handle-
bar to and fro over the entire steering range.
The idle speed must not change.
»
If the idle speed changes:
–
Adjust the play in the throttle cable.
Preparatory work
–
Remove the seat. (
p. 72)
–
Remove the fuel tank.
–
Check the throttle cable routing. (
3 ... 5 mm (0.12 ... 0.2 in)
(
p. 126)
(
p. 126)
(
p. 126)
(
p. 79)
p. 87)
Advertisement
Table of Contents
