Understanding The Operator Panel; Message Display - Kyocera Mita FS-C5016N Operation Manual

3.1 Understanding the Operator Panel

3.1 Understanding the Operator Panel
3.1.1

Message Display

The operator panel on the top of the printer has a 2-line by 16-character liquid crystal
display (LCD), eight keys, and three indicators (LED).
INTERFACE SIZE TYPE
Figure 3-1
Messages that appear on the display and functions of indicators and keys are explained in
the sections that follow.
The message display on the operator panel shows:
• Status information, the ten messages listed below which are displayed during normal
operation.
• Error codes, when the printer requires the operator's attention; as explained in
Chapter 4 Troubleshooting.
Status Information
Message
Self test
Please wait
Please wait
(Adding toner)
Please wait
(Calibrating)
Ready
Processing
Table 3-1
READY
DATA
ATTENTION
Meaning
The printer is performing self-diagnostics after power-up.
The printer is warming up and is not ready.
When the printer is switched on for the first time, this message
will take several minutes.
Toner is currently being replenished. This message may be dis-
played during continuous printing of a large volume of pages
which require a large amount of toner such as with photographs,
etc.
The color calibration function is being performed automatically
as you powered on the printer.
You can also execute this function manually on the operator
panel. For details, see
3-104.
The printer is ready to print.
The printer is receiving data to print. This is also shown when the
printer is reading a memory card, hard disk or RAM disk.
3-2
MENU
GO
?
ENTER
section 3.13.13 Color Calibration on page
CANCEL