Arrow Keys - Kyocera Mita FS-C5016N Operation Manual

MENU Key
MENU
The MENU key lets you enter the menu system to change the setup and printing
environment of the printer.
Pressing this key during a menu selection will terminate the selection and return the printer
to the normal operation.

Arrow Keys

?
The four arrow keys are used in the menu system to access a desired item or enter numeric
values.
The arrow key with the question mark (
appeared on the message display. Then a help message will appear to facilitate jam clearing
in the location.
ENTER Key
ENTER
This key is used to:
• Finalize settings of numeric values and other selections.
• Set the paper source when Use alternative? is shown in the message display.
If you hold down the ENTER key and press the MENU key when Ready is
shown on this printer, the AdministrationID menu will be displayed. This
menu is the setting menu for administration under the Account Management
Note
System and is normally not used. Press the MENU key to return to the
Ready display.
) may be pressed when the paper jam message has
?
3-7
3.1 Understanding the Operator Panel