Kyocera Mita FS-C5016N Operation Manual page 94

Changing the Default Font Size
You can change the size of the default font. If you selected a proportional font, the character
size can also be changed.
1
Press the MENU key.
2
Press the or
Font
3
Press the key. Press the
>Font Select
Internal
4
Make sure that Internal is displayed and press the
5
Press the or
>>Size
012.00 point(s)
6
Press the ENTER key. A blinking cursor (_) appears.
>>Size
012.00 point(s)
7
Press the or
font size can be set between 4 and 999.75 points, in 0.25-point increments. Use the
or key to move the cursor right and left.
8
When the desired size is displayed, press the ENTER key.
9
Press the MENU key. The display returns to Ready.
key repeatedly until Font > appears.
>
or key until >Font Select > appears.
>
key repeatedly until >>Size appears.
key to increase or decrease the value at the blinking cursor. The
3-47
3.6 Making Default Settings
key.