Understanding The Operator Panel; Message Display - Kyocera Mita WP31C Operation Manual

3.1 Understanding the Operator Panel

3.1 Understanding the Operator Panel
3.1.1

Message Display

The operator panel on the top of the printer has a 2-line by 16-character liquid crystal
display (LCD), eight keys, and three indicators (LED).
Figure 3-1
Messages that appear on the display and functions of indicators and keys are explained in
the sections that follow.
The message display on the operator panel shows:
• Status information, the eight messages listed below which are displayed during normal
operation.
• Error codes, when the printer requires the operator's attention; as explained in
Chapter 4 Troubleshooting.
Status Information
Message
Self test
Please wait
Please wait
(Calibrating)
Ready
Processing
Table 3-1
Meaning
The printer is performing self-diagnostics after power-up.
The printer is warming up and is not ready.
When the printer is switched on for the first time, this message
will take several minutes.
The color calibration function is being performed automatically
as you powered on the printer.
You can also execute this function manually on the operator
panel. For details, see
3-100.
The printer is ready to print.
The printer is receiving data to print. This is also shown when the
printer is reading a memory card or hard disk.
3-2
Section 3.13.12 Color Calibration on page