Kyocera Mita FS-C5016N Operation Manual page 181

3
Next, clean the main charger grid. Take the grid cleaner out of the toner kit. Take the
grid cleaner out of the protective bag and remove the cap.
Figure 5-20
The pad of the grid cleaner contains water. Clean the grid quickly so
that the pad may not dry off.
Note
4
Lift up slightly on the main charger unit and pull it out a short distance as shown in
the figure below.
Figure 5-21
5-13
5.3 Cleaning the Printer
Cap
Grid Cleaner
Main Charger
Unit