General Description Of Options; Memory Card - Kyocera Mita FS-C5016N Operation Manual

A.3

General Description of Options

A.3.1

Memory Card

The printer is equipped with a slot for a memory card with the maximum size of 256 MB. A
memory card is useful for storing fonts, macros, and overlays. You can use the IC Link for
Windows utility to download fonts, etc., to a flash memory card. This software is included
in the CD-ROM supplied with the printer.
Reading Font from the Memory Card
Once inserted in the printer's slot, the contents of the memory card can be read from the
control panel or automatically when you power on or reset the printer. To manually read
read data in the memory card, see
the Memory Card on page
Before inserting a memory card in the printer, make sure that the
printer is switched off.
Caution
Insert the memory card in the memory card slot.
Figure A-8
Chapter 3 Using the Operator Panel, section 3.9.1 Using
3-59.
A-7
Memory Card
Memory Card Slot