Cleaning The Paper Transfer Unit - Kyocera Mita FS-C5016N Operation Manual

5.3 Cleaning the Printer
5.3.2

Cleaning the Paper Transfer Unit

Print problems such as soiling of the reverse side of printed pages may occur if the paper
transfer unit becomes dirty. To clean the paper transfer unit, the following tool must be used:
• Cleaning cloth (included in the toner kit)
Clean the paper transfer unit according to the procedure that follows:
1
While pulling the green paper transfer unit release lever, pull out the paper transfer
unit.
Figure 5-26
2
Wipe away the paper dust on the registration roller and the paper ramp using the
wiper cloth included in the toner kit.
Paper Ramp
Wiper Cloth
Figure 5-27
Be careful not to touch the black transfer roller during cleaning as
this may adversely affect print quality.
Note
3
Push the paper transfer unit back in completely.
5-16
Paper Transfer Unit
Release Lever
Paper Transfer Unit
Transfer Roller
(Black)
Paper Transfer Unit
Registration Roller (Metal)