Kyocera Mita FS-C5016N Operation Manual page 44

2.4 Special Paper
When the label paper has extra margin around the label's outside edges that correspond to
the margins of the printable area, do not remove the extra top sheet from the carrier sheet
until printing is finished.
Allowed
Figure 2-20
When selecting labels, make sure to use only those meeting the following requirements:
Item
Top sheet weight
Total weight
Top sheet thickness
Total thickness
Moisture content
Table 2-6
Postcards
Fan the stack of postcards and align the edges before loading them in the MP tray. Make
sure the postcards you are going to set are not curled. Feeding curled postcards may cause
paper jams.
Some postcards have rough edges on the back (those are created when the paper is cut). In
this case, put the postcards on a flat place and rub the edges with, for example, a ruler to
smooth them.
Figure 2-21
Top sheet
Carrier sheet
Value
44 to 74 g/m² (12 to 20 lb)
104 to 151 g/m² (28 to 40 lb)
0.086 to 0.107 mm (3.9 to 4.2 mils)
0.115 to 0.145 mm (4.5 to 5.7 mils)
4 to 6 % (composite)
2-18
Not allowed