Set Alert Schedule As Always On - VTech VC7151-102A User Manual

Set Alert Schedule as Always on

The default setting of sensors' alert schedule is Always on.
You will receive an announcement alert - "Contact X is open"
or "Motion X sensor detected motion", every time a monitored
door, window, drawer, cupboard or jewelry box is opened, or
there is motion in the monitored area.
You can also set a reminder in case you forget to close the
monitored object. You can choose to receive an alert once
again if it remains open after 15, 30, or 60 minutes.
SENSORS
1. Press
idle, and then press
on the telephone base to scroll to the desired sensor.
-OR-
i. Press MENU when the phone is not in use.
ii. Press or
telephone base to scroll to Sensors, and then press SELECT.
iii. Press or
telephone base to scroll to the desired sensor, and then press SELECT.
OPTIONS
2. Press
3. Scroll to choose Set schedule
SELECT
4. Press
5. Scroll to choose Off, 15 minutes, 30 minutes, or 60 minutes, and then press
SELECT to save.
NOTES
When you received the alert tone and announcement, the handset will display Contact X
•
is open or Motion X detected motion, whilst the telephone base will display Contact X
is open or Motion X sensor detected motion.
• For Contact Sensor, both the handset and telephone base will also display , and the
SENSOR indicator on the telephone base will turn red.
on the handset or telephone base when
on the handset, or CALLS / or PHONEBOOK/
or
on the handset, or CALLS / or PHONEBOOK/
on the handset, or CALLS / or PHONEBOOK/
to enter the individual sensor menu.
chedule, and then press SELECT.
to select Always on. The reminder menu appears.
35
Open/closed 1
Set schedule
on the
on the