Table of Contents
Advertisement
8
SETTINGS
Your phone comes with a selection of settings that you can change to personalize
your phone the way you like it to
8.1 Handset Settings
8.1.1
Set the internal ringer melody
In Idle:
1. Press <MENU> and <UP/DOWN> to select HS Settings
2. Press <Select> and <UP/DOWN> to select Ring Setup
3. Press <Select> and <UP/DOWN> to select Internal Ring
4. Press <Select> and <UP/DOWN> to select your desired internal ringer melody (
10 ringer melodies and 5 standard tones
Note: The respective ringer melody will be played while browsing the melody list.
5. Press <Select> to confirm.
8.1.2
Set the external ringer melody
1. Press <MENU> and <UP/DOWN> to select HS Settings .
2. Press <Select> and <UP/DOWN> to select Ring Setup .
3. Press <Select> and <UP/DOWN> to select External Ring
4. Press <Select> and <UP/DOWN> to select your desired internal ringer melody
(10 ringer melodies and 5 standard tones
Note: The respective ringer melody will be played while browsing the melody list.
5. Press <Select> to confirm.
8.1.3
Adjust the Ringer Volume
In Idle:
1. Press <MENU> and <UP/DOWN> to select HS Setting s .
2. Press <Select> and <UP/DOWN> to select Ring Setup .
3. Press <Select> and <UP/DOWN> to select Ring Volume .
4. Press <Select> and <UP/DOWN> to select your desired ringer volume level
from Level 1 to Level 5 or Ringer
Note: The respective ringer volume will be played during your selection.
If Volume Off is selected, <Ringer Off> icon will display.
5. Press <OK> to confirm.
8.1.4
Set the alert tones
A single beep is emitted when you press a key. You can turn on or off the key tone.
You can also turn on the alert
1. Press <MENU> and <UP/DOWN> to select HS Settings .
2. Press <Select> and <UP/DOWN> to select Tone Setup
3. Press <Select> and <UP/DOWN> to select Key Tone / Battery Low / Out of Range
4. Press <Select> and <UP/DOWN> to turn on or off these tones.
5. Press <Select> to confirm.
8.1.5
Rename the handset
1. Press <Menu> and <UP/DOWN> to select HS Settings .
2. Press <Select> and <UP/DOWN> to select Rename HS
3. Press <Select> to enter your desired handset name.
Press <Clear> to delete one character or press and hold
<Clear> to delete the whole character string.
Note: The maximum number of characters of handset name is 12.
4. Press <OK> to confirm.
8.1.6
Set the contrast level
1. Press <Menu> and <UP/DOWN> to select HS Settings .
2. Press <Select> and <UP/DOWN> to select Contrast
work.
.
.
are provided).
are provided).
Off.
tones when low battery and out of range are detected.
.
.
.
.
.
.
15
Advertisement
Table of Contents
