Mounting; Tabletop Mounting; Ul Guidelines For Rack Mounted Devices; Under The Table Mounting - Extron electronics in1606 User Manual

Mounting

Tabletop Mounting

Attach the provided rubber feet to the bottom four corners of the enclosure.

UL Guidelines for Rack Mounted Devices

The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the
IN1606 in a rack.
1.
2.
3.
4.
5.

Under the Table Mounting

Use the optional MBU 149 mount kit to mount the IN1606 under a desk or table. Follow the
instructions included with the MBU 149.
Figure 48.
Elevated operating ambient temperature — If installed in a closed or multi-unit
rack assembly, the operating ambient temperature of the rack environment may be
greater than room ambient temperature, Therefore, install the IN1606 in an environment
compatible with the maximum ambient temperature (Tma = +122 ˚F, +50 ˚C) specified
by Extron.
Reduced air flow — Install the equipment in a rack so that the amount of air flow
required for safe operation of the equipment is no compromised.
Mechanical loading — Mount the equipment in the rack so that a hazardous
condition is not achieved due to uneven mechanical loading.
Circuit overloading — Connect the equipment to the supply circuit and consider the
effect that circuit overloading might have on overcurrent protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be used when
addressing this concern.
Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted
equipment. Pay particular attention to supply connections other than direct connections
to the branch circuit (e.g. use of power strips).
#8 Screw
(4) Places
Each Side
MBU 149
Mounting Bracket
Under-Desk Mounting
IN1606 Scaling Presentation Switcher • Reference Information
Mounting Screws
(2) Places
Each Side
75