Yamaha F50D Servise Manual page 292

BRKT
Removing the upper case
1. Drain the remained engine oil.
2. Disconnect the ground lead 1.
3. Remove the upper mounting nuts 2 and
lower mounting nuts 3 from the bracket
assembly, and then remove the upper
case assembly 4.
2
1
3
4. Remove the bolts 5, 6, and upper
mount 7, and then remove the oil seal
8.
X
5
8
5. Remove the bolts 9, housings 0,
ground lead q, and springs w.
9-13
Bracket unit
4
6
6
7
6. Remove the bolts e, washers r, rubber
washers t, lower mounts y, and wash-
ers u.
0
w
y
u
r
t
Installing the upper case
1. Install the upper mount 1 and bolts 2
into the upper case, and then tighten the
bolts 3.
2. Install the oil seal 4.
6
3
5
4
Bearing outer race attachment 5:
90890-06628
Driver rod LS 6: 90890-06606
3. Install the washers 7, lower mounts 8,
rubber washers 9, washers 0, and
bolts q to the upper case.
e
q
9
9
X
2
2
1