Yamaha F50D Servise Manual page 286

BRKT
f
Locknut d: 11 N·m (1.1 kgf·m, 8.1 ft·lb)
TIP:
Check that the fully closed mark e of the
indicator is aligned with the mark f on the
tiller handle.
5. Install the bushing 6, spring 7, washers
8, throttle grip 9, and cover 0 into the
tiller handle 2.
6
2
8
7
8
9
6. Push the throttle grip 9 so that the hole
g on the throttle glip 9 is aligned with
the hole h on the throttle shaft 1, and
then tighten the screw q.
9-7
Bracket unit
e
9
Lubricating the throttle gear
1. Apply grease into the grease nipple until
grease comes out from the screw hole
a.
0
g
h
q
a
1