Figure 69 Multilink Trunk Utilization Screen (2 Of 2); Table 28 Multilink Trunk Utilization Screen Fields - Nortel BayStack 380 Using Manual

Figure 69 MultiLink Trunk Utilization screen (2 of 2)

Table 28

Table 28 MultiLink Trunk Utilization screen fields

Field
Trunk
Traffic Type
Port
Last 5 Minutes
describes the MultiLink Trunk Utilization screen fields.
Description
Column header for the read-only fields in this screen. The read-only data displayed in
this column indicates the trunk (1 to 6) that corresponds to the switch ports specified
in the Port field.
Allows you to choose the traffic type to be monitored for percent of bandwidth
utilization (see Range).
Default Value Rx and Tx
Range Rx and Tx, Rx, Tx
Lists the trunk member ports that correspond to the trunk specified in the Trunk
column.
This read-only field indicates the percentage of packets (of the type specified in the
Traffic Type field) utilized by the port in the last 5 minutes. This field provides a
running average of network activity and is updated every 15 seconds.
Chapter 3 Using the console interface
Using the BayStack 380 10/100/1000 Switch
141