Nortel BayStack 380 Using Manual page 101

Table 9 IP Configuration/Setup screen fields (continued)
Field Description
In-Band Subnet The subnet address mask associated with the in-band IP address shown on the screen
Mask (see In-Band Switch IP address field). Network routers use the subnet mask to
determine the network or subnet address portion of a host's IP address. The bits in the
IP address that contain the network address (including the subnet) are set to 1 in the
address mask, and the bits that contain the host identifier are set to 0.
Default Value
Range
Default Gateway The IP address of the default gateway.
Default Value
Range
IP Address to The IP address of the network device you want to ping.
Ping
Default Value
Range
Start Ping Pings the selected network device when you choose Yes.
Default Value
Range
Chapter 3 Using the console interface
0.0.0.0 (no subnet mask assigned)
Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, between 0 and 255, separated by a decimal
point
0.0.0.0 (no IP address assigned)
Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, between 0 and 255, separated by a decimal
point
0.0.0.0 (no IP address assigned)
Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, between 0 and 255, separated by a decimal
point
No
No, Yes
Using the BayStack 380 10/100/1000 Switch
101