68
Chapter 2 Network configuration
Figure 24 VLAN Port Configuration screen example
VLAN workgroup summary
This section summarizes the VLAN workgroup examples discussed in the
previous sections of this chapter.
As shown in
multiple VLANs:
•
•
•
Because S4 does not support 802.1Q tagging, a single switch port on each switch
must be used for each VLAN (see
switches" on page
The connection to S2 requires only one link between the switches because S1 and
S2 are both BayStack 380 switches that support 802.1Q tagging (see
spanning multiple 802.1Q tagged switches" on page
212859-A
Figure
25, Switch S1 (BayStack 380 Switch) is configured with
Ports 1, 6, 11, and 12 are in VLAN 1.
Ports 2, 3, 4, 7, and 10 are in VLAN 2.
Port 8 is in VLAN 3.
61).
"VLANS spanning multiple untagged
60).
"VLANs