Table of Contents
Advertisement
142
Chapter 3 Using the console interface
Table 28 MultiLink Trunk Utilization screen fields (continued)
Field
Last 30 Minutes
Last Hour
Port Mirroring Configuration screen
The Port Mirroring Configuration screen allows you to configure a specific switch
port to monitor one specific port. You can specify ingress and egress port-based
monitoring.
For more information about the port mirroring feature, see
(conversation steering)" on page
Figure 70
To open the Port Mirroring Configuration screen:
212859-A
Description
This read-only field indicates the percentage of packets (of the type specified in the
Traffic Type field) utilized by the port in the last 30 minutes. This field provides a
running average of network activity and is updated every 15 seconds.
This read-only field indicates the percentage of packets (of the type specified in the
Traffic Type field) utilized by the port in the last 60 minutes. This field provides a
running average of network activity and is updated every 15 seconds.
shows an example of a Port Mirroring Configuration screen.
Choose Port Mirroring Configuration (or press i) from the Switch
Configuration Menu screen.
42.
"Port mirroring
Advertisement
Table of Contents
