Table 17 Mac Address Security Table Screen Fields - Nortel BayStack 380 Using Manual

Table 17

Table 17 MAC Address Security Table screen fields

Field
Find an Address
MAC Address
Allowed Source
1 Multicast address -- Note that the first octet of any Multicast address will always be an odd number.
describes the MAC Address Security Table screen fields.
Description
Allows you to search for a specific MAC address that is used in any of the
MAC Address Security Table screens.
Allows you to specify up to 448 MAC addresses that are authorized to access
the switch. You can specify the port that each MAC address is allowed to
access using the Allowed Source field (see next field description). The
specified MAC address does not take effect until the Allowed Source field is
set to some value. You can clear an existing MAC address field by entering
zero (0) in the field and pressing [Enter].
Default - - - - - (no address assigned)
Range A range of 6 Hex Octets, separated by dashes (multicast
and broadcast addresses are not allowed).
Allows you to specify a port that each MAC address is allowed to access. The
options for the Allowed Source field include a single port number or a port list
value. The port security for the allowed sources should be enabled for the
security to be effective.
Default - (Blank field)
Range A single unit/port or a port list value (for example, 1, 6, etc.).
Chapter 3 Using the console interface
Using the BayStack 380 10/100/1000 Switch
119
1