4.2.2.3 Removing ADF PCBA
(1) Gently open the ADF top cover.
(2) Remove the two screws(black)
(3) Remove the two screws(black)
(4) Turn the lever in the direction of the arrow to put the frame Assembly
upright.
(5) Remove the two screws(black)
(6) Restore the frame Assembly
(7) Release the frame Assembly
scanner to remove the Assembly and the paper tray
(8) Remove the two screws(black)
(9) Unplug all the connectors and remove the ADF PCBA
ADF top Cover
Lever
43605601TH Rev.1
to remove the cover-gear
.
.
and the paper tray
in their original positions.
from the hook near its support point on each side of the
.
to remove the ground wire
Oki Data CONFIDENTIAL
.
and the paper tray
.
.
60 /