Oki C3530nMFP Maintenance Manual page 129

No. Level
The sensor cannot detect the ADF center position correctly
when power is turned on.
This error occurs when power is turned on with a document
52 Error
left on the flat bed.
Remove the document from the flat bed and press the
Start button to reset.
Container transmission/receiving has failed.
This message is displayed until the Stop button is pressed.
%CODE%
0x01 - 0x0F
53 Error
%TIMING%
Command Container
Data Container
Response Container
Scanner communications error: Data was sent to the
scanner with the container length or additional data length
specified larger or smaller than the data container.
This message is displayed until the Stop button is pressed.
%CODE%
54 Error 0x01 - 0x0F
%TIMING%
Command Container
Data Container
Response Container
Scanner communications error: Data was sent to the
scanner with the container length specified larger or
smaller than the command container.
This message is displayed until the Stop button is pressed.
%CODE%
55 Error 0x01 - 0x0F
%TIMING%
Command Container
Data Container
Response Container
Scanner communications error: Data was sent to the
scanner with invalid data specified in the data container.
This message is displayed until the Stop button is pressed.
%CODE%
0x01 - 0x0F
56 Error
%TIMING%
Command Container
Data Container
Response Container
43605601TH Rev. 1
Function
Oki Data CONFIDENTIAL
Status Message
1 ADF Center Position Error
2 Please remove a document from
3 Flatbed
4
5 Press Start Button
1
2 Power Off/On
3 Scanner Line Error
4 %TIMING%, %CODE%
5
1
2 Power Off/On
3 Scanner Invalid Data Length
4 %TIMING%, %CODE%
5
1
2 Power Off/On
3 Scanner Invalid Command Length
4 %TIMING%, %CODE%
5
1
2 Power Off/On
3 Scanner Invalid Data
4 %TIMING%, %CODE%
5
PJLStatusCode
40760
40768
40769
40770
40771
129 /