Oki C3530nMFP Maintenance Manual page 156

No. Level
Scanner communications error: Data was sent to the
scanner with the container length or the additional data
length specified larger or smaller than the data container.
This message is displayed until the Stop button is pressed.
%CODE%
168 Error 0x01 - 0x0F
%TIMING%
Command Container
Data Container
Response Container
Scanner communications error: Data was sent to the
scanner with the container length specified larger or smaller
than the command container.
This message is displayed until the Stop button is pressed.
%CODE%
169 Error 0x01 - 0x0F
%TIMING%
Command Container
Data Container
Response Container
Scanner communications error: Data was sent to the
scanner with invalid data specified in the data container.
This message is displayed until the Stop button is pressed.
%CODE%
170 Error 0x01 - 0x0F
%TIMING%
Command Container
Data Container
Response Container
Scanner communications error: Data was sent to the
scanner with invalid parameters specified in the command
container.
This message is displayed until the Stop button is pressed.
%CODE%
171 Error 0x01 - 0x0F
%TIMING%
Command Container
Data Container
Response Container
Scanner communications error: Invalid container length,
protocol type, container type, or additional data are sent to
the scanner.
This message is displayed until the Stop button is pressed.
%CODE%
172 Error 0x01 - 0x0F
%TIMING%
Command Container
Data Container
Response Container
43605601TH Rev. 1
Function
Oki Data CONFIDENTIAL
Status Message
1 (Function name)
2 Power Off/On
3 Scanner Invalid Data Length
4 %TIMING%, %CODE%
5
1 (Function name)
2 Power Off/On
3 Scanner Invalid Command Length
4 %TIMING%, %CODE%
5
1 (Function name)
2 Power Off/On
3 Scanner Invalid Data
4 %TIMING%, %CODE%
5
1 (Function name)
2 Power Off/On
3 Scanner Invalid Parameter
4 %TIMING%, %CODE%
5
1 (Function name)
2 Power Off/On
3 Scanner Invalid Value
4 %TIMING%, %CODE%
5
PJLStatusCode
40769
40770
40771
40772
40773
156 /