Oki C3530nMFP Maintenance Manual page 147

No. Level
This notifies the user that the log buffer is full and the job
has been canceled (relating to JobAccount).
94 Warning The message stays on until the Start button is pressed.
Automatic density correction is in progress.
95 Warning
The displayed paper tray is empty.
This is treated as a warning until the empty tray is selected
96 Warning for printing.
%TRAY%
Tray1
The printer has received invalid data.
This message appears when the printer has received an
unsupported PDL command or a spooling-related command
97 Warning
when HDD is not provided.
It stays on until the specified button is pressed.
A decode error has occurred during Hiper-C emulation.
This status occurs only during the lifetime of the job.
98 Warning
The USB memory is removed while Scan to Memory is
executed or when the standby screen is on.
99 Error If the USB memory is removed, saving of the image file is
interrupted. After this message is displayed for 3 sec., the
display returns to the Scan To function select screen.
Address Book for e-mail addresses is full.
100 Warning
No profile is registered.
101 Warning
No Speed Dial or Group Dial is registered in the Phone
Book.
102 Warning
43605601TH Rev. 1
Function
Oki Data CONFIDENTIAL
Status Message
1 Print
2 Log Buffer is Full. Job Rejected
3
4
5 Press Stop Button
1 (Function name)
□
2
3 Adjusting Density
4
5
1 Print
□
2
3 %TRAY% Empty
4
5
1 (Function name)
2 Invalid Data
3
4
5 Press xxx Button
1 (Function name)
□
2
3 HiperC Decode Error
4
5
1 Memory
2 USB Memory Disconnected
3
4
5
1 Email
2 Address Book is Full
3
4
5
1 Profile List
2 Empty
3
4
5
1 Phone Book
2 Empty
3
4
5
PJLStatusCode
10982
10994
10988
16012
30114
30940
30941
30942
30943
30944
147 /