Feeder Unit - Oki C3530nMFP Maintenance Manual

4.2.3.11 Feeder unit

(1) Remove the left side cover. (See Subsection 4.2.3.1)
(2) Remove the right side cover. (See subsection 4.2.3.2)
(3) Open the front cover. (See Subsection 4.2.3.4)
(4) Remove the Lever_Lock_Assembly
(5) Remove the plate shield front. (See Subsection 4.2.3.16)
(6) Detach a connector
(7) Remove four screws (silver)
(8) Detach claws to remove the cover sensor
(9) Remove the MIP board (front sensor board)
BLA-PCB
(Main circuit board PCB)
43605601TH Rev.1
.
connecting to the feeder unit
to remove the feeder unit
.
.
Figure 4-2-3-11 Feeder unit
from the BLA board (main board).
.
BLA-PCB (Main circuit board PCB)
× 4
Oki Data CONFIDENTIAL
76 /