Oki C3530nMFP Maintenance Manual page 157

No. Level
Scanner communications error: Invalid command is sent to
the scanner.
This message is displayed until the Stop button is pressed.
%CODE%
0x01 - 0x0F
173 Error
%TIMING%
Command Container
Data Container
Response Container
This message appears when a photocopy is made to paper
of a size unsupported by the printer.
If this error occurs during photocopying, the photocopying
174 Error
is interrupted.
The fax memory has overloaded.
Pressing the Stop button changes the display to the Fax
standby screen.
175 Error
The pages already read will not be faxed.
Pressing the Stop button changes the display to the
function select screen.
Lamp error has occurred.
176 Error
Home sensor error has occurred.
177 Error
Sensor error has occurred.
178 Error
Scanner internal error has occurred.
179 Error
Calibration error has occurred.
An error occurred when a request to execute calibration
was made during a PC Scan.
180 Error
43605601TH Rev. 1
Function
Oki Data CONFIDENTIAL
Status Message
1 (Function name)
2 Power Off/On
3 Scanner Invalid Command
4 %TIMING%, %CODE%
5
1 Copy
2 Check Paper Size
3 Paper Size Error
4
5 Press Stop Button
1 (Function name)
2 Memory Overflow
3
4
5 Press Stop Button
1 (Function name)
2 Power Off/On
3 Scanner Lamp Error
4
5 Press Left Key
1 (Function name)
2 Power Off/On
3 Scanner Home Sensor Error
4
5 Press Left Key
1 (Function name)
2 Power Off/On
3 Scanner Sensor Error
4
5 Press Left Key
1 (Function name)
2 Power Off/On
3 Scanner Unit Error
4
5 Press Left Key
1 (Function name)
2 Power Off/On
3 Scanner Calibration Error
4
5 Press Left Key
PJLStatusCode
40774
40776
40778
40779
40780
40781
40782
40783
157 /