Connection Procedures - Oki C3530nMFP Maintenance Manual

3.8 Connection Procedures

<USB Connection>
Prepare a USB Cable.
Note! • The cable of the MFP is not attached. Users should buy seperately.
• Obtain the cable of USB specification by yourself.
• Use the USB cable of Hi-Speed specification in case the connection is to be made
using "HI-Speed" mode of USB2.0.
Switch off the power of the
Memo Although the USB cable can be connected or removed with the switch of the computer
and printer on, switch off the power of the MFP at this step in order to ensure
installation of the MFP driver and USB driver later.
Connect the with the computer.
MFP
(1) Plug the USB cable into the USB interface connector of the MFP.
(2) Plug the USB cable into the USB interface connector of the computer.
Note!
Be careful not to insert the USB cable into the network interface connector.
Or else it may cause troubles.
43605601TH Rev. 1
and computer.
MFP
UBS Interface Connector
Oki Data CONFIDENTIAL
52 /