Table of Contents
Advertisement
2.PLACING ORIGINALS
Using the ADF
Precautions for using the ADF
Do not load unacceptable originals in the ADF.
P.39 "Unacceptable originals"
If you scan mixed-size originals at a time or scan some types of paper of originals using the ADF, a distortion may occur
on your scan result.
When black streaks appear on printouts
If the scanning area or the guide area is dirty, image trouble such as black streaks may occur on printouts. Weekly
cleaning of these areas is recommended. For cleaning, refer to the Quick Start Guide.
For placing laterally-long originals at the RADF or using the DSDF
The original stopper prevents the scanned originals from falling off. Pull it out from the ADF and raise the sub-stopper.
For using the RADF, if you do not raise the sub-stopper with laterally-long or large originals, paper jamming may
occur.
For using the DSDF, if you do not raise the sub-stopper, paper jamming may occur depending on your paper or the
exited originals may fall off the stacker.
2
Lower the sub-stopper and slightly lift the original stopper to push it back in after you have finished using it.
42 Placing Originals
1
Advertisement
Table of Contents
