Monitor Setting - Furuno FCV-1900/B/G Installation Manual

3. INITIAL SETTINGS
3.2

Monitor Setting

Depending on your monitor, the resolution setting may need to be changed. The res-
olutions available are XGA (1024x768), SXGA (1280x1024) and SXGA (1024x1280,
portrait type). SXGA monitors (1280x1024) are set to the correct resolution and do not
require this initial setting.
Service menu
1. Press the MENU/ESC key to open the [Setting] menu.
2. Press the MENU/ESC key (approximately ten seconds) to show the [Service]
menu item in the menu.
Setting
Sounder
Display
Measurement
Alarm
Data
System
Service
3. Rotate the ENTER knob to select [Service], then push the knob.
4. Rotate the ENTER knob to select [Display Resolution], then push the knob.
Setting
Sounder
Display
Measurement
Alarm
Data
System
Service
5. Rotate the ENTER knob to select the resolution of your monitor, then push the
knob.
6. The processor unit is restarted automatically. The restart takes approx. 5 minutes.
Bottom Search
Deference Gain
Deference Bottom Level
Log
Display Resolution
SXGA （1280x1024）
TX Triggering
In Trigger
Trigger Input
Out Trigger
Trigger Output
External Fish Finder Trigger
Restore Default Setting
Demonstrate
XDCR Setting
White Marker
ACCU-FISH Calib
Bottom Search
Deference Gain
Deference Bottom Level
Log
Display Resolution SXGA （1280x1024）
TX Triggering
In Trigger
Trigger Input
Out Trigger
Trigger Output
External Fish Finder Trigger
Restore Default Setting
Demonstrate
XDCR Setting
White Marker
ACCU-FISH Calib
19
Auto
Off
↑
Off
Positive
Off
Off
Auto
XGA (1024 x 768)
SXGA (1280ｘ1024)
SXGA (1024 x 1280)
Off
↑
Off
Positive
Off
Off