Ethernet Hub - Furuno FCV-1900/B/G Installation Manual

1.5.1 Bulkhead mounting
1. Drill four pilot holes on the bulk-
head for self-tapping screws.
2. Screw in self-tapping screws
(3x20, supplied) for the upper fix-
ing holes, leave 5 mm protruding.
3. Set the interface unit to the
screws. Screw two self-tapping
screws for lower fixing holes.
4. Fasten the four screws to fix the
unit.
Note: Face the cables downward for
bulkhead mount.
1.5.2 Tabletop mounting
For tabletop or deck mount, fix the unit with four self-tapping screws.
1. Drill four pilot holes in the tabletop or deck for self-tapping screws.
2. Set the interface unit to the installation location.
3. Fasten the unit with four self-tapping screws (3x20, supplied).
1.6

Ethernet HUB

The Ethernet HUB (HUB-101, option) enables connection of a network sounder. For
further details, see the installation guide of HUB-101 (C42-00707).
4
1. MOUNTING