Furuno FCV-1900/B/G Installation Manual page 35

Table of Contents

Advertisement

5. Turn the processor unit on.
The message shown below appeared when the system is lower than the upgrade
key.
Note: When the upgrade key is a grade lower than the key in processor unit, the
processor unit starts normally and no upgrade system message is displayed.
6. Rotate the ENTER knob to select [Yes] and push the knob.
The upgrading starts automatically and the system is restarted.
7. Press the MENU/ESC key to display the [Setting] menu.
8. Rotate the ENTER knob to select [System], then push the knob.
9. Rotate the ENTER knob to select [Test], select [Diagnostic Test], then push the
knob.
The diagnostic test window appears.
Display Unit
Product
Product Grade :
grade
MAC Address :
IP Address :
CPU Status :
Signal Unit
ROM :
RAM :
MAC Address :
IP Address :
Power Voltage(12V) : 12.1V
Power Voltage(5V) : 5.0V
HF BVolt :
LF BVolt :
Fish Finder Sensors
ROM :
RAM :
Press the camera icon key 3 times to capture. (1/99)
10. At the first line of the [Display unit] section of the test result, confirm that the up-
grading is complete. "Product Grade" shows FCV-1900B or FCV-1900G depend-
ing on the upgrade.
11. Press the MENU/ESC key three times to close the test window.
12. Press the MENU/ESC key several times to close the menu.
13. Turn the processor unit off and then remove the USB flash memory.
Upgrade system?
Yes
FCV-1900
Application Ver :
00-40-9D-7D-9D-32
System Ver :
172.31.92.7
Kernel Ver :
29
Fan Speed :
OK
PWR Board Ver :
OK
CTRL Board Ver :
00-D0-1D-0C-A5-31
TRX Board Ver :
172.31.92.6
Application Ver :
FPGA Ver :
Boot Ver :
120.9V
Start Ver :
113.2V
Fan Speed :
OK
Application Ver :
Boot Ver :
OK
28
No
0252434-xx.xx
U-Boot Ver :
0252437-xx.xx
PIC Boot Ver :
0252436-xx.xx
PIC Main Ver :
5160rpm
0
Port1(NMEA1) :
0
Port2(NMEA2) :
0
Port3(Tankenmaru) : --
0252425-xx.xx
Port4(SC) :
0252426-xx.xx
Port5(CIF) :
0252424-xx.xx
Telesounder :
0252423-xx.xx
Temp :
8640.0rpm
Temp :
xxxxxxxxxx
xxxxxxxxxx
Press the [MENU/ESC] key 3 times to exit.
xx.xx: Program version
3. INITIAL SETTINGS
0252435-xx.xx
1950143-xx.xx
1950144-xx.xx
--
--
--
--
--
10.4ºC
10.4ºC

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents